Based on Halcyonics' proven VarioControl technology, these bench top units offer the convenience of an alphanumeric easy-to-navigate menu. VarioControl units have two displays; one for menu navigation and a second to obtain additional information on current vibration levels. Vibration signals of sensors and actuators can be chosen and visualized as graphical bars. The user therefore always obtains summarized information on the current vibration condition of the application. Halcyonics Micro systems feature an automated transport locking mode and fully automatic load adjustment; they take only a few seconds to start up. There is no further adjusting or tuning required. Thus, the Micro systems offer ideal portability even for field measurements and presentations.
Micro 40, 60 and 80 - high-performance bench top isolators
Thanks to Halcyonics VarioControl technology, active vibration isolation takes effect right at 0.6 Hz and considerably increases from this frequency upward. Above 10 Hz, Halcyonics Micro systems achieve an isolation of 40 dB - that means that 99.0% of the vibration is effectively isolated. In addition to their high performance isolating floor vibration through AVI (active vibration isolation), a major advantage of active Halcyonics systems is that they do not have any natural low-frequency resonance, which is responsible for issues encountered with passive vibration isolation systems in low-frequency ranges below 5 Hz. Micro systems isolate vertical and horizontal vibration as well as vibration generated around the vertical axis of rotation as well as both horizontal axes of inclination. The degree of freedom of the active isolation system is thus six.
Applications for the Micro Active Vibration Isolation desktop units include, but are not limited to: Atomic Force Microscopy (AFM, SPM), Inverse Microscopy with or without AFM Head, CSLM, Profilometer, Nanoindenter, Nano Hardness Tester, Ultra-precise Scales, Reference Laser Cavities, and many more.
If you are looking for an isolation system for your AFM, please also take a look at the Microscopy Workstation, which consists of a Micro Benchtop isolator integrated into an ergonomic lab desk.
Features & Benefits
- Supreme performance even under severe environmental conditions: Active isolation starts from 0,6 Hz and is active until 200 Hz (and passive above 200 Hz) ideal to dampen vibrations caused by air conditioning systems, shaking of buildings, vibrations caused by roads nearby, etc.
- easy to install and operate: set up the system within minutes and operate it by pushing just two buttons.
- Qualified service: for standard and customized solutions factory trained persons will support you in finding the optimal solution for your specific measurement task.
- Reliable systems: after passing an internal 48-hour run-in test we are happy to provide a 2 years guarantee
- Low voltage DC electromagnetic actuators avoid high voltage used for Piezo systems = no interference with your delicate instrumentation
- Shorten the time to publish your results: off-the-shelf availability and rapid delivery will allow you to start your work right away
- Software module integrated in each instrument to identify the ideal position of your measurement set up in your lab.
- Service hubs in Europe, US and Asia for fast support in the event of unlikely failure of an instrument.
|
|
